Pigeon / Comms for your flock
Messages that get through.
A small family of devices for the people you care about, next door or interstate. Paper, voice, text and a keychain. Every one uses the internet first, falls back to radio when it is down, and can be carried pocket to pocket when nothing else is up.
The flock
Four ways to reach your people
Your flock is the short list of people you said yes to. Add someone once and they can reach you on every device you own. Nobody else can.
-

Draft manual PN-84 / Paper
A note on your desk
A palm-sized printer. A few lines from someone in your flock arrive and a slip rises from the slot and waits. No screen, no app, no notifications.
-

Draft manual Shortwave / Voice
Hold the button, talk
A walkie for you and your mates, not your phone. A screen, a channel wheel, a talk key and a real antenna. The casing is designed; the firmware comes next.
-

In design The messenger / Text
Short messages, thumb keyboard
A wide memory screen and a real keyboard. Text is the lightest thing to send, so this is the member that keeps working furthest off the grid. Rendered from the CAD as it stands; the design is still changing.
-

Concept The keychain / Reach
Carried pocket to pocket
When the internet is down, messages hop from keychain to keychain and ride with people who travel, arriving in hours instead of seconds. One button: "We're OK". A concept image only; no CAD yet.
One scale
The whole flock, side by side
Drawn face on in millimetres. Each one wears the same warm white shell and the same charcoal band, so they read as one family on a desk or a key ring.
How it works
Every device, every path
You never choose how a message travels. It goes by whatever works and falls back on its own: the internet on a normal day, LoRa radio from device to device when the internet is down, and pocket carry between cities when nothing else is up.
| Path | PN-84 printer | Shortwave walkie | Messenger | Keychain |
|---|---|---|---|---|
| InternetWi-Fi or a phone hotspot | Yes | Yes, live and clips | Yes | Through your phone |
| LoRa radioDevice to device, licence-free, a few km | Short notes | Short clips, slowly | Yes, ideal | Yes |
| Pocket carryKeychain to keychain, interstate, hours to a day | Short notes | Not practical | Yes | Yes |
So every member carries a LoRa radio and a real antenna, and every message uses one format that any path can carry.
Flares
One message, every device
For the messages that matter, send to the person, not the device. A flare goes to everything they own, over every path at once. The printer prints it, the walkie chimes, the messenger shows it and the keychain blinks. Seeing it anywhere counts, and you know where.
- Printed on the PN-84 in the kitchen
- Shown on the messenger
- Marked seen everywhere once one device is acknowledged
NR 0012 07:41 via LoRa
Power is out here.
We're OK. Call tonight.
Mum saw it, on the printer
07:52Daily limits apply to every sender, so a flare can never become spam.
One family
Built to work as one
Four devices, one set of ideas underneath. Anything that would remove a path is treated as a fault.
One identity
One key per person, the same on every device. Add a friend once and they are in your flock on paper, voice, text and keychain.
Only people you said yes to
One friends list and one consent rule. A message from anyone else is held until you approve them, and each sender gets a small daily allowance.
One message format
Private, end to end encrypted messages. The same message can ride the internet, the radio or a pocket.
One core
A standard core of bought modules: an ESP32-S3 controller with Wi-Fi and a LoRa radio. Anyone can design a different case around it.
One look
A warm white shell, a charcoal band held by black screws, the hexagon mark and one orange part: the paper trim, the talk key, the send key, the button.
Open source
The hardware, the firmware and the manuals are open. The licences are stated in each build manual.
How you make one
Print it, wire it, build it
Every Pigeon device is a kit you make yourself from printed parts and bought modules, with an illustrated manual that follows your choices.
Prototype
Print the parts once in Elegoo ABS-Like 3.0 with the fit coupons and check every fit before the final print.
Print
In tough resin on an MSLA printer, or in PLA on any 0.4 mm filament printer. Each manual covers both routes.
Wire
Bought modules joined by a short harness. No custom circuit board to order.
Build
Step by step, with the part you are fitting shown in orange in every picture, then the bring-up checks.
Build manuals
Read before you print
Each manual lists every part with an A$ cost, covers the resin and PLA routes, and says plainly what is still a draft.
- DraftPN-84 printerParts, print files and fit coupons, the wiring harness, firmware, twelve bring-up checks, the core assembly and the base shell.Open the manual
- DraftShortwave walkieParts, both print routes, wiring, the assembly steps and the antenna boot fit. The firmware chapter is still to come.Open the manual
- In designThe messengerA manual follows once the design is settled.
- ConceptThe keychainA manual follows once there is a design to build.