B-Sideby RPXL

B-Side Audio kits by RPXL

Hardware you build yourself.

A volume knob for your desk, a music player for your pocket with optional record cards that carry an album each, and speakers: one for a bag and one that holds the player. You print the parts in resin, paint them flat matte, add a few real bought parts and put each one together by hand.

Colourway Pick one and the whole page follows.

The kits drawn face on at one scale: VK-01 is 92 mm wide and 43 mm tall, PK-01 66 by 78 mm, the SP-01 pocket speaker 86 by 80 mm and the SP-01 dock speaker 185 by 104 mm with PK-01 standing in its bay. VK-0192 × 43 PK-0166 × 78 SP-01 pocket86 × 80 SP-01 dock185 × 104
Face on, at one scale, in millimetres. PK-01 stands 36 mm proud of the dock speaker, so its wheel clears the top.

Three kits, one family

Each one is printed in resin, painted flat matte, fitted with a few real bought parts and put together by hand. Open a kit for its close-ups and what goes into it.

Music on a card

Record cards are an optional add-on to PK-01. A card is a flat rectangle with nothing sticking out that carries an album and its cover. It slides into a slot in the top edge and ends level with it, so only its spine shows while it plays. File them in a small printed rack by their spines, or give one to a friend.

See the record cards

How the range fits together

Each kit stands on its own. Put them side by side and they start to work as one system: the music lives on a card, the player docks in the speaker, and the knob keeps the computer's volume under your hand.

  1. 01

    A record card

    Carries one album and its cover. Slides into the top edge of PK-01. Give one to a friend.

    Record cards
  2. 02

    PK-01 plays it

    From the card, or from its own microSD library, through a 3.5 mm jack or over Bluetooth.

    PK-01
  3. 03

    The SP-01 dock holds it

    PK-01 stands in the bay in its face. The dock charges it and plays it in stereo, with no pairing for you.

    SP-01 dock
  4. 04

    The SP-01 pocket goes with you

    The same cord, cloth and rocker in a speaker for a bag. Pairs with PK-01 or a phone.

    SP-01 pocket
  5. 05

    VK-01 sits by the computer

    Turn for volume, press to mute, whatever is playing. USB or Bluetooth, no software.

    VK-01

One paint system and the same five colourways run through all three, so a set matches on the desk. The same screws, cord and cloth turn up in more than one kit, so spare parts go further.

Build it your way

These kits are for people who love the idea of making something well and do not have much to spend. The printed casing is the same whether you fit Budget, Mid or Premium components, so a small budget never gets a lesser design.

  • VK-01's tiers are the knob: printed, bought knurled, or CNC aluminium. USB or Bluetooth is a separate edition.
  • PK-01's Budget build has the mono OLED screen and its Premium swaps in a turned aluminium wheel sleeve, a brass hold cap and a card circuit board. Record cards are optional in every tier.
  • SP-01 comes in two sizes, a pocket speaker for a bag and a dock speaker for stereo and PK-01. Each size has its own Budget, Mid and Premium parts.

What a higher tier adds is what you feel under a finger or hear in the headphones. The shape, the cord, the cloth and the build do not change.

From a vat of resin to the thing on your desk

Each kit has an illustrated manual that follows your choices. This is the path every one of them takes.

  1. Prototype

    Print the parts once in Elegoo ABS-Like 3.0 with the fit coupons and try every fit before you spend the good resin.

  2. Print

    In a tough opaque resin, or in PLA on a filament printer: each manual covers both routes. Every part has a stated pose that keeps supports off the faces you see and the faces that fit.

  3. Finish

    Grey filler primer, then flat matte paint, part by part. No clear coat and no fake metal: printed parts look printed, metal parts are metal.

  4. Build

    Captive nuts, black button heads and a few printed pins. The cloth sits on a cord, so whatever you might open again comes apart.

  5. Live with it

    Painted resin wears at the edges over years. Every part can be repainted or reprinted from the same files.

Build manuals

Every kit has one illustrated page that follows your choices and shows only your build. Each covers both print routes, resin and PLA, starts with a prototype print to test the fits, and lists every part to buy with an A$ cost.

Make it yours

The five colourways at the top of this page are starting points, not a shop. Paint the parts any colour you like. Roll in any grille cloth you can find: a plain grey, a tartan, even a camo print. Pick the cord and the metal to suit. The files do not change, so nothing about the build does either.

Paints in Oat